Certified Brake-Clutch & Suspension specialist
When you bring your vehicle to us for servicing we can offer some extra benefits that other service centres may not give you. With our large range of spare parts & reconditioning divisions we are able to provide our customers with the best service & price
FAQ's
Why is my brake warning light on?
Fault in braking system.This may be caused by a leak or lack of fluid or faulty master cylinder or servo, which will render your brakes not fully functional. Do not drive the vehicle, as it could be dangerous. It could also be a faulty sensor or electrical fault. Fill up the brake fluid reservoir, check for leaks, normal brake pedal operation and call Brabond Automotive for professional assistance
Why is my ABS warning light on?
Fault in the ABS Braking system. (where fitted) Your brakes should work but there will be no ABS operation. So if you brake hard your wheels may lock up. ABS systems are complex and can only be repaired by professionals. Call Brabond Automotive ASAP to get the fault rectified.
Why does my brake pedal feel spongy?
Air in System / Distorted or faulty linings Call Brabond Automotive ASAP to get the fault rectified.
Why does my brake pedal flutter (pulsing)?
This will be caused by distorted discs or oval drums. Call Brabond Automotive ASAP to get the fault rectified.
Why does my hand brake feel weak or ineffective?
Your handbrake should not require more than 5 clicks to hold your car on a steep road. Handbrake cable may need adjusting or replacement.Worn rear brake pads or faulty rear brakes.Call Brabond Automotive ASAP to get the fault rectified.
Why are my brakes pulling or locking up?
Faulty drum or Disc / Unsuitable Tyre pressure / Worn Linings / Seized Caliper Pistons Check and renew worn parts. Check Tyres, Suspension, Steering and Shock absorbers.Call Brabond Automotive ASAP to get the fault rectified.
My brakes are squealing.
Worn retaining pins / No pad dampening shims / incorrect pads Renew components / fit correct padsGlazed discs or pads Call Brabond Automotive ASAP to get the fault rectified.
Why is my engine rev high but my vehicle's speed has not increased?
Faulty or worn clutch plate, or pressure spring assembly. Oil could be also leaking from your engine and or gearbox onto the clutch linings Call Brabond Automotive ASAP to get the fault rectified.
Why does my car shudder when taking off? Most noticeable when reversing uphill.
Check for broken, damaged or loose engine mounts first.If not engine mounts replace clutch plate assembly and thrust bearing, machine the flywheel and check/replace all relevant oil seals.
Why does it take extra effort to shift gears and or 1st gear impossible to select when wanting to take off?
Low fluid level in clutch master cylinder. Leaks or air in hydraulic system.Seized or leaking master/slave cylinder or hoses/connections Or broken or seized clutch cable in mechanically actuated clutch systems Excessive clutch pedal free travelWarped clutch plate Call Brabond Automotive ASAP to get the fault rectified.
Address
Brabond Automotive
504 Forest Rd Penshurst, NSW 2222
Phone / Fax
P : (02) 9580 7562
F : (02) 9580 1075
